|
Top
Ten and-a-half Training Tips for Martial Arts Conditioning
(Excerpted
with permission from Secrets of Martial Arts Conditioning
by Alwyn Cosgrove, MSS, CSCS)
Applying
these principles -- I have come up with ten (and a half ☺ )
training guidelines
for the combat athlete that must be present to ensure competitive success.
1)
BODYWEIGHT BEFORE EXTERNAL RESISTANCE
Many athletes make the mistake of beginning a strength routine and going
straight for the heavy weights. This usually ends up causing
an injury. An athlete has no business using load if he/she
cannot stabilize, control and move efficiently with only their
bodyweight. So your strength program in the beginning stages
may actually include no weights whatsoever. And it will work
better
and faster than a typical program that relies primarily on
weights and machines in the beginning stages. In fact in my experience I'd suggest that some
athletes cannot even work with
their bodyweight so we may need to modify certain exercises.
Do
not rush to lift heavy loads -- muscle recruitment and control are far more important than
maximal strength for any athlete. Without control -- the
strength is useless.
2)
TRAIN TO THE 5TH POWER
This
is a concept I learned from Juan Carlos Santana -- basically
it refers to the following.
1st Train in a standing
position - GROUND BASED. The
majority of athletic training should take
place in an upright
position -- standing. Of course there are exceptions
to this rule, but in
general, we always lose something
when we go from a standing position to a seated
or
lying position.
2nd Train with free weights
(destabilized).. Any
machine limits the range of motion and
controls the movement. This is fine for beginners, but
athletes need to be able to
stabilize and control their
bodies in all three planes of motion simultaneously.
3rd Use Multiple Joints (the
kinetic CHAIN is natural). Single joint strength (e.g. leg
extension
machine, bicep curls)
develops useless strength . A study was undertaken
at Ohio State
involving a knee extension test. The
participants included:
3
World ranked squatters
1
World Record holder in the squat
The
test results of the above subjects averaged 180lbs of force
on the Cybex leg
extension machine. However
a local power lifter (ranked 15th in the state) broke
the
machine. He wasn't even number one in his state
but he was stronger on this machine
than
the World ranked lifters.
If there is a better example of the inability of
single joint
machine training to translate to real world strength
then I'd like to see it. A guy who was
only
ranked 15th
in the state can apply more single leg strength than a World Record
holder. Nice. Pretty. But pretty useless. If that
strength doesn't transfer then what's the
point
of having it?
Basically, despite the strength that individual exhibited on the machine, he was unable to
apply
it in a real world situation
-- like squatting. And the elite squatters weren't that
strong on the leg extension -- showing it's not even a factor.
So leg extension machines are a waste of time. Unless of course
you compete in seated
butt-
kicking leg extension contests
☺
"How can anyone expect to possess co-ordination in active
work when his muscles have
never worked together
in groups?"
-- Earle Liederman 1924
Nearly 80 years ago and we are still
having this argument today. Isolation
machines have
no
place in the preparation of a competitive athlete.
"Single -joint exercises, such as leg extensions and leg curls develop movement patterns
that
will
interfere with patterns
you use in sport. Such exercises lead to inappropriate
muscle
recruitment patterns that can impair movement
and lead to injury."
-- Thomas Fahey
4th Train with explosiveness.
Explosiveness as I see it can be defined as 'as fast as
possible with control'.
Some people seem to feel that explosiveness
is somewhat
dangerous. Sloppy training, uncontrolled
movements? That's dangerous. Training
explosively more closely mirrors what happens in sport and/or
life.
5th Train functionally -
train movements not muscle groups. Again,
isolated muscle group
training, outside of rehabilitation
has no place in athletic training. An athlete should
focus
on strengthening specific movements. True muscle
isolation is impossible anyway, so let's
focus on using that body
to work in an integrated fashion.
3)
TRAIN UNILATERALLY AND MULTI-PLANAR
The
majority of training programs take place in the sagittal plane
with bilateral movements.
Sport takes place in all 3 planes simultaneously with
primarily unilateral movements.
4)
USE PRIMARY METHODS TO DEVELOP STRENGTH
Max
Strength Method - heavy loads
Repeated
Efforts Method - multiple sets
Dynamic
Effort Method - using relatively lighter weights and
moving them at max speed
(this is the least used
method)
5)
VARIATION
Everyone
seems to understand that training load should be progressively
increased. Few
understand that the training stimulus must also be progressively and periodically varied.
All
programs have positive and negative aspects no matter how well designed or specific --
too much time on one program and you'll habituate
to the positive aspects and accumulate the negative aspects.
6)
AVOID MIMICKING SKILLS
The
role of conditioning training is NOT skill training. Loading a technique tends to affect the
mechanics of the technique negatively.
7)
TRAIN WITH BALANCE
Balance
between motor qualities.
Balance between movement patterns (e.g. horizontal push-pull)
8)
FOCUS ON RATE OF FORCE DEVELOPMENT
Either
lift lighter weights fast, or heavy weights as fast as possible (intent is more important than
actual speed).
9)
TRAIN THE ANTAGONISTS
The
speed of a kick or punch is determined largely by the ability of
the antagonist to
eccentrically decelerate the joint action efficiently and prevent
joint injury. If your body cannot safely and effectively
"brake" the motion, then it will not allow you to
achieve full acceleration. If
you are not training the antagonists eccentrically - you are not training deceleration. And if
you are not training deceleration you cannot
be training acceleration.
Think about it . how fast would you drive your car if you knew
your brakes were not
working at their best?
10)
NO AEROBIC TRAINING
Aerobic
training is pretty much a total waste of time. There is nothing in
any martial art that is done
aerobically . it is done at high intensity, explosively
and at full speed -- usually without oxygen. Martial arts
take place at the limits
of the anaerobic threshold -- there is no benefit to doing
long slow training of any kind.
10.5)
USE UNDULATING PERIODIZATION
When
using linear models, we tend to lose the qualities we initially sought to improve
(e.g. 6 weeks of hypertrophy, 6 weeks of strength. 6 weeks of
speed strength).
At
this point it has been 12 weeks since we were exposed to hypertrophy
methods - so we'll have lost portions of that quality. A better
method is to alternate accumulation and intensification phases.
Typical
mistakes:
1)
Sacrificing Quality for Quantity. Don't do more of something until
you can do it well. More is not better.
BETTER is BETTER
2)
Seeking fatigue/soreness. The effectiveness of training is not
determined by the amount of fatigue it produces but by the degree
to which it improves the qualities
and/or abilities you're trying to develop.
3)
Excessive focus on loading. Too
much focus on the loads and not how it is being moved, and
whether or not there is optimal transfer (standing split stance
cable press v barbell bench press). Also the time taken to go from a 300lb squat to a
400lb squat may not be worth the return
in the real world.
4)
Lack of diversity. Unchanging
routines leads to staleness and overuse injuries
5)
Lack of continuity. Write
programs, not workouts - try to write 12-16 weeks at a time. Understand that certain factors
may mean that you need to change
your routines -- that's OK. However, what I typically see is
a situation where trainers and coaches do not write long term plans; they write single
workouts. This leads to a lack of continuity
and progress.
Remember
the ironic rule of strength training for sport. The objective is
not to get
stronger per se but to improve athletic performance. Do not get
caught up in
the numbers game and do not confuse gym improvements with real
world or
sports world improvements. The greatest athletes in the world do
not necessarily
have the greatest bench presses in the world. The greatest athletes
in the world have an ability to produce useable force on their
field of play.
Usable force is force that propels athletes towards the ball,
knocks another athlete back or down, helps you move at full speed,
or throws the winning
touchdown pass. Usable force is force properly directed in an unstable real
world, unpredictable environment. The weight room, in general, is a stable
environment whereas a field of play or the competition ring is a constantly
changing place. A good strength and conditioning coach looks to improve athletic
performances . not just gym lift numbers.
About
the author
For the past fourteen years Alwyn Cosgrove has been committed to
achieving excellence
in the field of fitness training and athletic preparation.
Specializing in
performance enhancement, Alwyn has helped countless individuals
and athletes
reach their goals through sound scientific training.
During his career as a strength and conditioning coach, Alwyn has
worked with
a wide variety of clientele, including several Olympic and
national level athletes,
five World Champions and professionals in a multitude of sports including
boxing, martial arts, soccer, ice skating, football, fencing,
triathlon, rugby,
bodybuilding, dance and fitness competition.
A
former Taekwondo international champion , Alwyn has utilized his
personal experience
as an athlete and combined it with the advanced theories of European Sports
Science and the principles of modern strength and conditioning
systems.
Visit
here to purchase Secrets of Martial Arts Conditioning
or other programs by Alwyn Cosgrove
|